BLUETOOTH SPEAKER
GSB 120
EN
_________________________________________________________________________________
–
+
8
AUX-IN
DC-IN-9-V
●
●
A
3-
_________________________________________________________________________________
5- SET-UP-AND-SAFETY-
5
RF Exposure Warning
5
Important battery information Warning
-
6- OVERVIEW
6
6
6
Bluetooth device compatibility
Controls and sockets
LED indicators
7- CONNECTION-AND-PREPARATION
7
7
7
Connecting the power adapter
Charging the device
Connecting external devices
-
8- OPERATING
8
8
9
9
9
9
Switch on
Bluetooth function
Play Audio signal from an external device
Speaker phone
Battery Saving
Switch off
-
10- INFORMATION
10 Technical data
10 Environmental note
4-
SET-UP-AND-SAFETY- _____________________________________________
Please note the following instructions when set-
ting up the device:
Notes:-
7
Do not connect any other equipment while
the device is switched on. Switch off the oth-
er devices as well before connecting them.
Only plug the device into the mains socket
after you have connected the external de-
vices. Make sure the power adapter is free-
ly accessible.
7
This device is designed for the playback of
audio signals. Any other use is expressly pro-
hibited.
7
7
Make sure there is adequate ventilation when
positioning the device. There must be a free
space of at least 10 cm behind the device. Do
not place objects on the ventilation slots.
RF-Exposure-Warning
This equipment must be installed and operated
7
Do not cover the device with newspapers, ta-
ble cloths, curtains, etc.
7
in acordance with provided instructions and
the antenna(s) used for this transmitter must be
installed to provide a separation distance of
at least 20 cm from all persons and must not
be co-located or operating in conjunction with
any other antenna or transmitter. End-users
and installers must be provide with antenna in-
stallation instructions and transmitter operating
conditions for satisfying RF exposure compli-
ance.
7
Please note when deciding where to put the
device that furniture surfaces are covered by
various types of lacquer and plastic, most of
which contain chemical additives. These may
cause corrosion to the feet of the device, thus
resulting in stains on the surface of the furniture
which can be difficult or impossible to remove.
7
If the device is exposed to sudden changes in
temperature, for example when taken from the
cold into a warm room, wait at least two hours
before using it.
Important-battery-informa-
tion-Warning
7
The device is designed for use in dry rooms.
7
You product contains a battery and charging
Protect the device from rain, moisture (drip-
ping or splashing water) and heat (heaters or
direct sunlight, etc).
system which is designed to work in tempera-
tures that do not exceed 50°C. Leaving this
product in a closed automobile or the trunk
of an automobile where temperatures may
7
Only use the device in a moderate climate.
exceed 50 °C may result in permanent bat-
7
Do not place any objects containing liquids
(for example, vases) on the device.
tery damage, fire, or explosion. Please remove
your product from the automobile when you
exit, do not place your product in the trunk of
your automobile
7
Do not place any objects such as burning can-
dles on the device.
7
7
Do not use or leave your product in any loca-
Never open the device casing under any cir-
cumstances. No warranty claims are accepted
for damage resulting from improper handling.
tion where temperatures may exceed 50
°C.
7
Do not use any cleaning agent, as this may
damage the casing. Clean the device with a
clean, moist leather cloth.
7
Thunderstorms are a danger to all electrical
devices. Even if the device is switched off, it
can be damaged by a lightning strike to the
mains. Always remove the mains plug during
an electrical storm.
ENGLISH
5-
-_____________________________________________________________
OVERVIEW
Bluetooth-device-compatibility
Your GBS 120 connects with all Bluetooth
Devices that support the A2DP profile including
the most smartphones, laptops and tablets.
Controls-and-sockets
See the figure on page 3.
8-
S- witches the device on and off.
Starts and pauses playback.
Switches the hands-free equip-
ment on and off.
–
Reduced the volume.
Enhanced the Volume.
Charging Indicator.
+
●-(red)
Microphone for hands-free
equipment.
A
●-(blue)
Bluetooth Indicator.
Flashing – searching for Blue-
tooth auxiliary device;
Lit – Bluetooth auxiliary device
is “registered”.
AUX-IN
AUX IN socket (ø 3.5 mm) for
connecting an external device.
DC-IN-9V
DC IN socket, for the power
adapter.
LED-indicators
Charging-indicator
7
Illumine red – charging.
7
Red disappear – full charge.
Bluetooth-indicator
7
No indication – The device is off.
7
Flashing blue – Blue tooth pairing mode.
7
Illumine blue – Blue tooth connection mode.
Illumine red – the battery is flat.
7
6- ENGLISH
-____________________
CONNECTION-AND-PREPARATION
7
Recharge efficiency will degrade when envi-
ronmental temperatures drop below 5°C or
exceed 35°C.
Connecting-the-power-adapter
Note:-
7
Check that the mains voltage on the type
Warning:
plate on the bottom of the device corre-
sponds to your local mains supply.
If this is not the case, contact your spe-
cialist dealer.
7
Do not expose the battery to temperatures
in excess of 45C.
Connecting-external-devices
1 Connect the single plug of the power adapter
into the »DC-IN-9-V« socket.
Note:-
7
Switch the device off before you connect
external devices.
2 Connect the power adapter into the wall sock-
et.
1 Use a standard audio adapter to connect the
audio outputs of the external device to the
»AUX-IN« (ø 3.5 mm) socket.
Caution:
7
The device is connected to the mains with
the power cord. Pull out the power adapter
if you want to completely disconnect the de-
vice from the mains.
Notes:-
7
The GBS 120 will auto-switch into AUX IN
mode from Bluetooth mode after insert AUX
IN cable to the device.
7
Make sure the power adapter is easily ac-
cessible during operation and not hindered
by other objects.
7
If want to back to Bluetooth mode, please
remove AUX IN cable from the »AUX-IN«
socket.
Charging-the-device
1 The power adapter to the device will automat-
ic recharge the internal rechargeable battery.
– The charging indicator illuminate “red“
while the device is charging and disappear
when the device is fully charged.
Notes:
7
Charge the unit for about 4 hours.
7
When the device is switched on and is not
connected to the power supply via the net-
work adapter, the Bluetooth display informs
you when the battery is empty (display red).
Using-and-maintaining-your--
rechargeable-battery
7
The battery must be charged at least 4 hours
prior to first use.
7
For long period of storage, please recharge
the battery at least once every two months to
maintain the battery in optimum condition.
Once the battery is fully discharged, immedi-
7
ately recharge regardless of whether you plan
to use the battery or not in order to maximize
battery life.
ENGLISH
7-
- ___________________________________________________________
OPERATING
Connecting-a-paired-Bluetooth-
Device
Notes:-
7
Auxiliary Bluetooth devices must only be
paired once (depending on the auxiliary
Bluetooth device).
When leaving and then returning to the re-
ception range of the GSB 120, the auxiliary
Bluetooth device will pair with it automati-
cally.
Bluetooth-function
Pairing-Bluetooth-Device
Note:-
7
7
Make sure that AUX IN cable is removed
from the »AUX- IN« socket. Otherwise, it
can‘t enter into pairing mode.
7
7
The GSB 120 will only connect automati-
cally with the last paired auxiliary Bluetooth
device.
If the auxiliary Bluetooth device is not de-
tected, it must be reactivated via its menu.
1 Press and hold the »8« button for 2 seconds to
turn on the unit.
– The blue indicator will start blinking.
– Now you can ready to pair your device
with the unit.
2 Activate on the Bluetooth Device the Bluetooth
Play-Audio-signal-from-your-Blue-
function.
tooth-Device
3 Start on the Bluetooth Device the search func-
tion.
1 Begin playback on auxiliary Bluetooth device.
2 Press »–« or »+« to adjust the volume.
Note:-
Note:-
7
Enter »0000« when your Bluetooth Device
asks for the PIN code.
7
The volume can also be adjusted from the
auxiliary Bluetooth device.
4 Once paired, the unit will beep and the blue
indicator will turn on steadily.
3 Press »8« to pause playback.
Press »8« again to continue playback.
Note:-
Notes:-
7
Although the unit can only stream audio from
7
Keep in mind that unit has a 9 m Bluetooth
wireless range.
one device at a time, it is capable of being
paired with up to eight devices. This means
that you only have to enter the PIN code one
time for each device.
7
The volume controls on your Bluetooth De-
vice work separately from the volume con-
trols on the unit.
Disconnect-the-Bluetooth-Device
1 Turn off the connected Bluetooth Device or
press »+« and »–« at same time to disconnect
the Bluetooth Device.
8- ENGLISH
- ___________________________________________________________
OPERATING
Play-Audio-signal-from-an-
external-device
Alternative you can listen to the sound of a
connected external device (e.g. a MP3 player)
through your device.
Notes:-
7
It will auto-switch into AUX IN mode from
Bluetooth mode after insert AUX IN cable
to the device.
7
If want to back to Bluetooth mode, please
remove AUX IN cable from the »AUX-IN«
socket.
1 Use a standard audio adapter to connect the
audio outputs of the external device to the
»AUX-IN« (ø 3.5 mm) socket.
2 Press and hold the »8« button for 2 seconds to
turn on the unit.
3 Switch on the external device and starts play-
back.
4 Press »8« to start playback.
5 Press »8« again to pause playback.
6 Press »–« or »+« to adjust the volume.
Speaker-phone
You can also use your GSB 120 as a speaker
phone for telephone conversations.
1 To accept a call, press »8«.
2 To end a call, press »8« again.
Battery-Saving
The device will enter a power saving mode if no
audio signal is played for 30 minutes.
1 Press and hold the power button »8« 2 sec-
onds to wake up the device.
Switch-off
1 Press and hold the »8« button for 2 seconds to
turn off the unit.
ENGLISH
9-
-______________________________________________________
INFORMATION
Technical-data
Environmental-note
This product has been manufac-
tured with high quality parts and
materials which can be reused
and are suitable for recycling.
0890
This device is noise-suppressed according to the
applicable EU directives.This product fulfils the
European directives 1999/5/EC, 2009/125/
EC and 2011/65/EU.
Therefore, do not dispose the product with nor-
mal domestic waste at the end of its service life.
Take it to a collection point for the recycling of
electrical and electronic equipment. This is indi-
cated by this symbol on the product, in the oper-
ating manual and on the packaging.
The type plate is located on the bottom of the
device.
Power-supply
Power Adaptor: Input: AC 100 - 240V
Please consult your local authorities to learn the
nearest collection point.
~
50/60Hz
Help protect the environment by recycling used
products
>
Output: 9 V , 670 mA
Max-power-consumption
Betrieb:
5 W
Stand-by:
< 0.5 W
Power-Output--
DIN 45324, 10% THD
Output power:
2 x 5 W
Dimensions-and-Weight
L x W x H:
Weight:
170 x 70 x 70 mm
450 g
Technical and design modifications reserved.
10- ENGLISH
|