DELUXE 12 VOLT DC LIGHT KIT
Model 93861
3491 Mission Oaks Blvd., Camarillo, CA 93011
TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS.
©
Copyright 2006 by Harbor Freight Tools®. All rights reserved. No portion of this
instruction sheet or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.
PRODUCT SPECIFICATIONS
Item
Power Source
Description
12 Volt DC / Negative Ground
Features
2 Combination, Class A, Stop-Tail-Turn Lights
License Plate Bracket
2 Side Marker Clearance Lights
23 Ft., Split Y-Style Harness
4 Ft., Color Coded Trunk Harness
Bulb Types
Weight
Stop-Tail-Turn Lights: 12V 21/5W (#1157) / Marker Lights: 12V 5W (#194)
2.2 Pounds
*Department of Transportation
SAVE THIS INSTRUCTION SHEET
You will need this instruction sheet for the safety warnings and precautions, assembly instructions, parts
list, and assembly diagram. Keep your invoice with this instruction sheet. Write the invoice number on
the front of this instruction sheet. Keep this instruction sheet and invoice in a safe and dry place for future
reference.
UNPACKING
When unpacking, check to make sure all the parts shown on the Assembly Diagram are included. If any
parts are missing or broken, please call Harbor Freight Tools at the number above as soon as possible.
SAFETY WARNINGS AND PRECAUTIONS
1.
2.
Use eye protection. Make sure to wear ANSI approved safety impact eye goggles when installing this
Light Kit.
Prior to installing this product, make sure to read and understand all instructions and safety pre-
cautions as outlined in the (trailer, camper, etc.) manufacturer’s manual onto which the Light Kit
will be installed.
Trailer Light Mounting And Connection:
1.
Mount the Stop-Tail-Turn Light (1), marked “L.H.” (with the License Window), on the left rear of the
trailer with its side marker to the outside of the trailer. Then, mount the License Plate Bracket (3) with the
Stop-Tail-Turn Light. (See Assy. Diagram.)
2.
3.
Mount the Stop-Tail-Turn Light (1), marked “R.H.” (without the License Window), on the right rear of
the trailer with its side marker to the outside of the trailer. (See Assy. Diagram.)
Use the Metal Frame Clips included in the Mounting Hardware Package (6) to mount each half of the
Split Y-Style Harness (4) down each side of the trailer. Run the YELLOW and BROWN wires down the
left side and GREEN and BROWN wires down the right side of the trailer. (See Assy. Diagram.)
4.
5.
Connect the YELLOW and BROWN wires to the left hand Stop-Tail-turn Light (1) with the Wire Nut
Connectors included in the Mounting Hardware Package (6). (See Assy. Diagram.)
Connect the GREEN and BROWN wires to the right hand Stop-Tail-turn Light (1) with the Wire Nut
Connectors included in the Mounting Hardware Package (6). (See Assy. Diagram.)
6.
7.
Attach the WHITE GROUND wire to the trailer tongue or frame. (See Assy. Diagram.)
Mount the two Marker Clearance Lights (2) in the areas shown in the illustration. Connect each wire
from the Marker Clearance Lights to the BROWN wire on each half of the Split Y-Style Harness (4).
(See Assy. Diagram.)
8.
9.
Connect the Split Y-Style Harness (4) Plug to the Color Coded Trunk Harness (5) Plug.
(See Assy. Diagram.)
Turn on the towing vehicle’s headlights. The two Stop-Turn-Tail Lights (1) and two Marker Clearance
Lights (2) should turn on. The brighter Stop Lights should turn on only when the vehicle’s brake pedal is
depressed, or when the vehicle’s turn signal is activated (ignition key must be in its “on” position).
10.
If the Light Kit fails to illuminate, check all ground connections. If the turn signals on the Light Kit do
not illuminate, check the connections between the towing vehicle’s wiring and the Color Coded Trunk
Harness (5). (See Assy. Diagram.)
2
2
1
1
3
4, 5
6
(Due to continuing improvements, actual product may differ slightly from the product described herein.)
Part #
Description
Qty Part # Description
Qty
1
1
2
3
Stop-Tail-Turn Light
2
2
1
4
5
6
Split Y-Style Harness
Marker Clearance Light
License Plate Bracket
Color Coded Trunk Harness
Mounting Hardware (1 package)
1
1
NOTE: Some parts are listed and shown for illustration purposes only, and are not
available individually as replacement parts.
Maintenance
Monthly check wiring for deterioration; screws for tightness and that bulbs are not burned out.
Replace all problems.
SKU 93861
For technical questions, please call 1-800-444-3353
PAGE 3
LIMITED 90 DAY WARRANTY
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability
standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship
for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly,
to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper
installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to
persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation
of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our
inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund
the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products
at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope
of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to
state.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS MANUALASAREFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES
ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO
REPLACEANYPARTS OFTHE PRODUCT. IN FACT, THE MANUFACTURERAND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
SKU 93861
For technical questions, please call 1-800-444-3353
PAGE 4
|