StainleSS Steel rolling
cabinet
Model 97320
Set up and operating inStructionS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
distributed exclusively by Harbor Freight tools .
3491 Mission Oaks Blvd., Camarillo, CA 93011
read this material before using this product.
Failure to do so can result in serious injury.
SaVe tHiS Manual.
©
®
Copyright 2007 by Harbor Freight Tools . All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
4.
Use the product in accordance with these instructions and in the manner intend-
ed for the particular type of product, taking into account the working conditions
and the work to be performed. Use of the product for operations different from
those intended could result in a hazardous situation.
SerVice
1.
2.
Have product serviced by a qualified repair person using only identical replace-
ment parts. This will ensure that the safety of the product is maintained.
Maintain labels and nameplates on the product. These carry important safety
information. If unreadable or missing, contact Harbor Freight Tools for a replace-
ment.
MiScellaneouS
1.
2.
Do not exceed the weight capacity of the drawers, shelves or cabinet.
Be aware of dynamic loading! Dropping or bouncing a heavy item may briefly
create excess load causing product failure.
3.
4.
5.
6.
7.
Depress the locks on all casters before use.
Do not open more than one drawer at a time.
Load the Cabinet evenly, from the bottom up.
Do not step on drawers.
The warnings, precautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
SaVe tHeSe inStructionS.
SKU 97320
For technical questions, please call 1-800-444-3353.
Page 3
SpeciFicationS
Drawers: 95 Pounds
Weight Capacity
Top Shelf: 500 Pounds
Overall: 1355 Pounds
unpacking
When unpacking, check to make sure that the item is intact and undamaged. If
any parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.
operating inStructionS
read the entire iMportant SaFety inForMation section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
1.
2.
3.
Load the Cabinet from the bottom up, evenly distributing weight.
Use the keys to lock the cabinet before moving it.
Only use or move the cabinet on a smooth, level surface, capable of bearing the
combined weight of the Cabinet, tools loaded, and the operator.
4.
To remove a drawer; empty it, and pull the drawer all the way out. On each side
of the back of the drawer, there are small levers on the slider; the lever on the left
side must be pulled up, and the lever on the right side pushed down, to remove
the drawer. Holding the levers in position, slide the drawer off the end of the slid-
ers.
5.
6.
The drawer can be slid back onto the slider and closed with no extra operations.
Clean, then store the product indoors out of children’s reach.
Maintenance and SerVicing
damaged products can fail, causing personal injury. do
not use a damaged product. if abnormal noise or vibration
caution
occurs, have the problem corrected before further use.
1.
2.
beFore eacH uSe, inspect the general condition of the product. Check for
loose screws, misalignment or binding of moving parts, cracked or broken parts
and any other condition that may affect its safe operation.
periodically, clean external surfaces of the product with clean, moist cloth.
SKU 97320
For technical questions, please call 1-800-444-3353.
Page 4
pleaSe read tHe FolloWing careFully
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLy
DIAgRAM IN THIS MANUAL AS A REFERENCE TOOL ONLy. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANy REPRESENTATION OR WARRANTy OF ANy KIND TO THE BUyER THAT
HE OR SHE IS qUALIFIED TO MAKE ANy REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
qUALIFIED TO REPLACE ANy PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR ExPRESSLy STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD
BE UNDERTAKEN By CERTIFIED AND LICENSED TECHNICIANS, AND NOT By THE BUyER. THE
BUyER ASSUMES ALL RISK AND LIABILITy ARISINg OUT OF HIS OR HER REPAIRS TO THE
ORIgINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISINg OUT OF HIS OR HER
INSTALLATION OF REPLACEMENT PARTS THERETO.
partS liSt & diagraM
part
description
Qty
part
description
Qty
1
Piston
1
8
Drawer E
2
2
3
4
5
6
7
Shelf
1
2
1
1
1
4
9
Drawer F
2
Drawer A
Drawer B
Drawer C
Drawer D
Casters
10
11
12
13
14
Lid Handle
Slider
1
18
2
Key (not shown)
Side Handles
Slider
2
18
1
2
10
3
4
11
12
5
13
8
9
6
7
14
SKU 97320
For technical questions, please call 1-800-444-3353.
Page 5
liMited 90 day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high
quality and durability standards, and warrants to the original purchaser that this prod-
uct is free from defects in materials and workmanship for the period of 90 days from
the date of purchase. This warranty does not apply to damage due directly or indirectly,
to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities,
criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
We shall in no event be liable for death, injuries to persons or property, or for incidental,
contingent, special or consequential damages arising from the use of our product. Some
states do not allow the exclusion or limitation of incidental or consequential damages, so
the above limitation of exclusion may not apply to you. THIS WARRANTy IS ExPRESS-
Ly IN LIEU OF ALL OTHER WARRANTIES, ExPRESS OR IMPLIED, INCLUDINg THE
WARRANTIES OF MERCHANTABILITy AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us
with transportation charges prepaid. Proof of purchase date and an explanation of the
complaint must accompany the merchandise. If our inspection verifies the defect, we
will either repair or replace the product at our election or we may elect to refund the
purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that
the defect resulted from causes not within the scope of our warranty, then you must
bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353
record product’s Serial number Here:
note: If product has no serial number, record month and year of purchase instead.
note: Some parts are listed and shown for illustration purposes only, and are not avail-
able individually as replacement parts.
SKU 97320
For technical questions, please call 1-800-444-3353.
Page 6
|