INSTALL INSTRUCTIONS C-TCB-9
1989-2001 JEEP CHEROKEE
TOOLS REQUIRED:
3/16” Allen wrench
3/8” Standard socket set
3/8” Metric socket set
Ratcheting wrench (3/8” drive)
Powered drill w/ 3/16” drill bit
Open-end wrench set
HARDWARE & COMPONENTS:
QTY DESCRIPTION
PART #
1
1
1
1
1
2
Pole support assembly
Telescoping pole assembly
Side support brace
5/16” Flat washer
5/16-18 Nylock nut
CM93071-9
CM93072-3
CM93146
GSM31006
GSM30017
GSM33060-1
¼” x ¾”Hex head lag bolt
Always!
ꢀ Read all instructions before installing any Havis-Shields Equipment Corp products.
ꢀ Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
ꢀ Use hardware provided with install kit
Side support
brace
¼” x ¾”Hex
head lag bolts
Telescoping pole
assembly
Pole support
assembly
5/16-18
Nylock nut
Location of
passenger side factory
seat base bolts
|