HUAWEI HG523a Home Gateway
User Guide
HUAWEI TECHNOLOGIES CO., LTD.
Copyright © Huawei Technologies Co., Ltd. 2011. All
rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means
without prior written consent of Huawei Technologies Co., Ltd.
The product described in this manual may include copyrighted software of Huawei
Technologies Co., Ltd and possible licensors. Customers shall not in any manner
reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse
engineer, lease, assign, or sublicense the said software, unless such restrictions are
prohibited by applicable laws or such actions are approved by respective copyright
holders under licenses.
Trademarks and Permissions
,
, and
are trademarks or registered trademarks of Huawei
Technologies Co., Ltd.
Other trademarks, product, service and company names mentioned are the property of
their respective owners.
Notice
Some features of the product and its accessories described herein rely on the software
installed, capacities and settings of local network, and may not be activated or may be
limited by local network operators or network service providers. Thus the descriptions
herein may not exactly match the product or its accessories you purchase.
Huawei Technologies Co., Ltd reserves the right to change or modify any information or
specifications contained in this manual without prior notice or obligation.
NO WARRANTY
THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS’’. EXCEPT AS
REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR
CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE
SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL,
INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS,
BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.
Import and Export Regulations
Customers shall comply with all applicable export or import laws and regulations and will
obtain all necessary governmental permits and licenses in order to export, re-export or
import the product mentioned in this manual including the software and technical data
therein.
Contents
1 Warnings and Precautions ....................................................................... 1
2.1 Connecting One Telephone..........................................................................4
2.2 Getting Started .............................................................................................5
Computer.............................................................................................................6
5 Configuring the HG523a ........................................................................ 10
Web-Based Configuration Utility......................................................................10
5.5 Restoring Default Settings..........................................................................12
i
6 FAQs......................................................................................................... 12
7 Appendix.................................................................................................. 15
7.1 Indicators....................................................................................................15
7.2 Interfaces and Buttons................................................................................17
7.3 Default Settings..........................................................................................17
7.4 Technical Specifications.............................................................................17
ii
1 Warnings and Precautions
Thank you for purchasing the HG523a Home Gateway (hereinafter referred to as the
HG523a).
To use the device properly and safely, read these warnings and precautions carefully
and strictly observe them during operation.
Unless specified, the device described in this section includes the device
and its accessories.
Basic Requirements
During storage, transportation, and operation of the device, keep it dry and prevent
it from colliding with other objects.
Do not dismantle the device. In case of any fault, contact an authorized service
center for assistance or repair.
Without authorization, no organization or individual can change the mechanical,
safety, or performance design of the device.
When using the device, observe all applicable laws and regulations and respect the
legal rights of other people.
Environmental Requirements for Using the Device
Before connecting and disconnecting cables, stop using the device, and then
disconnect it from the power supply. Ensure that your hands are dry during
operation.
Keep the device far from sources of heat and fire, such as a heater or a candle.
Keep the device far from electronic appliances that generate strong magnetic or
electric fields, such as a microwave oven or a refrigerator.
Place the device on a stable surface.
Place the device in a cool and well-ventilated indoor area. Do not expose the device
to direct sunlight. Use the device in an area with a temperature ranging from 0°C to
40°C.
Do not block the openings on the device with any object. Reserve a minimum space
of 10 cm around the device for heat dissipation.
Do not place any object (such as a candle or a water container) on the device. If any
foreign object or liquid enters the device, stop using the device immediately, power
1
it off, remove all the cables connected to it, and then contact an authorized service
center.
During thunderstorms, power off the device, and then remove all the cables
connected to it to prevent it from getting damaged due to lightning strikes.
Precautions for Using Wireless Devices
The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons.
Do not use the device where using wireless devices is prohibited or may cause
interference or danger.
The radio waves generated by the device may interfere with the operation of
electronic medical devices. If you are using any electrical medical device, contact
its manufacturer for the restrictions on the use of the device.
Do not take the device into operating rooms, intensive care units (ICUs), or
coronary care units (CCUs).
Areas with Inflammables and Explosives
Do not use the device where inflammables or explosives are stored, for example, in
a gas station, oil depot, or chemical plant. Otherwise, explosions or fires may occur.
In addition, follow the instructions indicated in text or symbols.
Do not store or transport the device in the same box as inflammable liquids, gases,
or explosives.
Accessory Requirements
Use only the accessories supplied or authorized by the device manufacturer.
Otherwise, the performance of the device may get affected, the warranty for the
device or the laws and regulations related to telecommunications terminals may
become null and void, or an injury may occur.
Do not use the power adapter if its cable is damaged. Otherwise, electric shocks or
fires may occur.
Ensure that the power adapter meets the specifications indicated on the device
nameplate.
Ensure that the power adapter meets the requirements of Clause 2.5 in
IEC60950-1/EN60950-1 and it is tested and approved according to national or local
standards.
The socket-outlet shall be installed near the equipment and shall be easily
accessible.
2
Safety of Children
Keep the device and its accessories out of the reach of children. Otherwise, they may
damage the device and its accessories by mistake, or they may swallow the small
components of the device, causing suffocation or other dangerous situations.
Maintenance
If the device is not used for a long time, power it off, and then remove all the cables
connected to it.
If any exception occurs, for example, if the device emits any smoke or unusual
sound or smell, stop using the device immediately, power it off, remove all the
cables connected to it, and then contact an authorized service center.
Do not trample, pull, or overbend any cable. Otherwise, the cable may get damaged,
causing malfunction of the device.
Before cleaning the device, stop using it, power it off, and then remove all the
cables connected to it.
Use a clean, soft, and dry cloth to clean the device shell. Do not use any cleaning
agent or spray to clean the device shell.
3
2 Connecting the Cables and Getting
Started
Connecting One Telephone
If your telephone line is used for both the broadband network access and a telephone
connection, take the following figure as a reference for connecting the cables.
2.1
1
5
c
4
a
3
b
2
1. Power adapter
2. Computer
3. Telephone
4. Splitter
5. Telephone jack on the wall
b. Phone interface
a. Modem interface
c. Line interface
4
If the wireless network function is used on the HG523a for the network
access, you do not need to connect the network cable.
Getting Started
2.2
To power on the HG523a, press the ON/OFF button on the side of the HG523a.
After you power on the HG523a, the ADSL indicator blinks (for less than three
minutes), which indicates that the HG523a is being activated. Later, the ADSL
indicator turns solid on. The Power indicator is also solid on, which indicates that the
HG523a is working properly.
3 Setting the Network-Access Parameters
By configuring the HG523a and your computer, you can choose any of the following
methods to surf the Internet:
Accessing the Network through the
3.1
Embedded PPP Dial-Up Software on the HG523a
If you select this method for accessing the network, the HG523a starts to set up a
dial-up connection automatically after the startup. You can access the network after you
power on your computer. You do not need to install any special dial-up software on
your computer or perform dial-up operations on your computer. To configure the
HG523a and your computer for the network access, do as follows:
Step 1 Log in to the Web-based configuration utility of the HG523a.
in the address bar, and then press Enter.
2. In the displayed dialog box, enter the user name and the password, and
then click Login.
By default, both the user name and the password are admin. After the user name and
the password are verified, you can access the Web-based configuration utility.
Step 2 Enable the embedded dial-up function.
1. In the navigation tree on the left of the Web-based configuration utility,
choose Advanced > Basic > WAN.
2. Click New.
5
3. Select Enable check box for WAN connection.
4. Enter the VPI and VCI that are provided by the network operator in the
VPI/VCI text boxes.
5. Select Internet from the Service list.
6. Select PPPoE option button for Connection type.
7. Select Enable check box for NAT.
8. Enter the user name and password that are provided by the network
operator in the User name and Password text boxes, and keep the default
settings of other parameters.
9. Click Submit to save the settings.
After you complete the preceding settings, you can surf the Internet.
You need to perform the preceding operations on a computer once only. The next time
when you power on your computer, you can surf the Internet without any configuration.
Accessing the Network through the PPP
3.2
Dial-Up Software on Your Computer
If you select this method for accessing the network, you need to install and configure
the dial-up software on your computer. In addition, you need to perform dial-up
operations on your computer upon each startup. To configure the HG523a and your
computer for the network access, do as follows:
Step 1 Set the working mode of the HG523a to
.
Bridge
For details, refer to the procedure for enabling the embedded dial-up function described
in Step 2 in section 3.1 "Accessing the Network Through the Embedded PPP Dial-Up
drop-down combo box.
Step 2 Install and configure the PPP dial-up software on your computer.
The PPP dial-up software is pre-installed on certain computer operating systems. To
create a dial-up connection, do as follows (taking the Windows XP operating system as
an example):
1. Choose Start > All Programs > Accessories > Communications >
Network Connections.
2. Click Create a new connection in Network Tasks to display the New
Connection Wizard window, and then click Next.
3. Select Connect to the Internet, and then click Next.
4. Select Set up my connection manually, and then click Next.
5. Select Connect using a broadband connection that requires a user
name and password, and then click Next.
6. Enter the name (as desired) of the dial-up connection in ISP Name, and
then click Next.
7. Select Anyone's use or My use only, and then click Next.
6
8. Enter the user name and password provided by the network operator and
used for the dial-up connection, and then click Next.
9. Select Add a shortcut to this connection to my desktop, and then click
Finish.
An icon for the dial-up connection is displayed on the desktop of your computer.
You need to perform the preceding operations only once for creating a network
connection. After the network connection is created, to access the network,
double-click the icon for the dial-up connection, and then click Connect in the
displayed dialog box.
4 Configuring the Wireless Network
Connection
The HG523a provides the WLAN function on a Local Area Network (LAN). If a
wireless network adapter is installed on your computer, you can connect your computer
to the HG523a through a wireless connection.
The hardware installation methods and driver installation methods of
wireless network adapters provided by different companies vary from each
other. For details, see the installation guide provided by the wireless
network adapter provider.
To set up a wireless connection, use either of the following methods:
Setting Up a Wireless Connection Through
4.1
the WPS Button
The HG523a supports the Wi-Fi Protected Setup (WPS) function. If your network
adapter also supports the WPS function, you can use the WPS function to set up a
wireless connection between your PC and the HG523a quickly.
To configure the wireless network connection, do as follows:
Step 1 Check whether the WLAN indicator of the HG523a is on. If the WLAN
indicator is off, Press the WLAN button on the side panel of the HG523a to
enable the WLAN function.
Step 2 Press the WPS button on the side panel of the HG523a to enable the HG523a
to enter the WPS negotiation state.
7
Step 3 Enable the WPS negotiation function of the wireless network adapter on your
PC within two minutes, and then wait for a moment (typically 10s and at most
120s).
The WPS indicator of the HG523a becomes on from the blinking state, indicating that
the HG523a is connected to your PC through the WLAN. This state lasts 300s. Then the
WPS indicator turns off.
The WPS applications may vary with different types of wireless network
adapters. For details about the configuration and operations of the WPS
application, refer to the operation guide provided by the application
provider.
Setting Up a Wireless Connection Manually
4.2
If your network adapter does not support the WPS function, you can set up a wireless
connection between your PC and the HG523a manually. To manually set up a wireless
connection, use two of the following methods:
Use the tool provided by your network adapter. For details, see the user guide of
your network adapter.
Use the wireless configuration software provided by the operating system of your
PC. If your PC runs on Windows XP, you can use the wireless configuration
software that is provided by Windows XP to set up a wireless connection between
your PC and the router.
This section takes Windows XP as an example and describes how to set up a wireless
connection between your PC and the HG523a manually, do as follows:
Step 1 Set the wireless network name and access password of the HG523a.
To set the wireless network name and the access password, do as follows (taking the
authentication type WPA-PSK/WPA2-PSK as an example):
1. Log in to the Web-based configuration utility.
2. In the navigation tree on the left of the Web-based configuration utility,
choose Advanced > Basic > WLAN > WLAN.
3. Select the Enable WLAN check box.
4. Select the SSID1 from the SSID index drop-down combo box.
5. Enter a wireless network name in the SSID text box.
6. Select WPA-PSK/WPA2-PSK from the Security drop-down combo
box.
7. Enter an access password in the WPA pre-shared key text box.
8. Select TKIP+AES from the WPA encryption drop-down combo box.
9. Click Submit to save the settings.
Step 2 Enable the wireless configuration service provided by Windows XP.
8
1. Right-click My Computer, and then choose Manage from the shortcut
menu.
2. In the Computer Management window, choose Computer
Management (Local) > Services and Applications >Services.
3. From the services listed in the right pane of the Computer Management
window, right-click Wireless Zero Configuration, and then choose
Properties from the shortcut menu.
4. In the Wireless Zero Configuration Properties (Local Computer)
dialog box, check whether Service status is Started. If not, click the
Start button.
5. Click OK to close the dialog box. Then, close the Computer
Management window.
Step 3 Configure the wireless network connection on your computer.
1. Choose Start > All Programs > Accessories > Communications >
Network Connections.
2. In the Network Connections window, right-click Wireless Network
Connection to display a shortcut menu, and then choose Properties from
the shortcut menu.
3. In the Wireless Network Connection Properties dialog box, select
Wireless Networks.
4. Select Use Windows to configure my wireless network settings.
5. Click View Wireless Networks.
Connect in the lower right corner of the window.
7. In the displayed dialog box, enter the access password that is preset in
After the password is verified, Connected appears on the icon of the wireless network
in the wireless network list, which indicates that the computer is connected to the
HG523a through a wireless connection.
8. Close the Wireless Network Connection dialog box.
9. In the Wireless Network Connection Properties dialog box, click OK.
9
5 Configuring the HG523a
Changing the Administrator Password Used
5.1
for Logging In to the Web-Based Configuration
Utility
For safety reasons or to make the password easy to remember, you can change the
administrator password for login after logging in to the Web-based configuration
utility.
To change the password, do as follows:
Step 1 Log in to the Web-based configuration utility.
Step 2 Choose
>
>
in the navigation tree to
Advanced Maintenance Account
display the system management page.
Step 3 Select the
from the
drop-down combo box.
admin
User name
Step 4 Enter the Current password in the
text box. Enter the new
Current Password
password in the New Password text box. Then enter the new password again
in the Confirm password text box for confirmation.
Step 5 Click
to save the settings.
Submit
After you change the password successfully, the current page jumps to the page for
logging in to the Web-based configuration utility. To log in to the Web-based
configuration utility, enter the new password, and then click OK.
If you forget the user name or password that has been changed, you can
restore the default settings of the HG523a by pressing and holding the
RESET button for over six seconds. Then, the user name and password
that are used for logging in to the Web-based configuration utility are
restored to default values. After you restore the default settings, however,
your customized data is lost. Therefore, use this function with caution.
Enabling or Disabling the Wireless
5.2
Network Function
You can quickly enable or disable the wireless network function by pressing the
WLAN button on the HG523a. To enable the wireless network function, press and hold
the WLAN button for over one second, and then release the button. You can disable the
wireless network function in the same way. The WLAN indicator shows whether the
wireless network function is enabled.
10
In addition, you can enable or disable the wireless network function through the
Web-based configuration utility, do as follows:
Step 1 Log in to the Web-based configuration utility.
Step 2 In the navigation tree on the left, choose
WLAN.
>
> W
LAN
>
Advanced Basic
Step 3 Select the
combo box or not.
Enable WLAN
Changing the Wireless Network Name and
5.3
the Access Password
To change the name and access password for the wireless network, do as follows
(taking the authentication type WPA-PSK/WPA2-PSK as an example):
Step 1 Log in to the Web-based configuration utility.
Step 2 In the navigation tree on the left, choose
WLAN.
>
> W
LAN
>
Advanced Basic
Step 3 Enter a wireless network name in the
text box.
SSID
WPA Pre-Shared Key
to save the settings.
Step 4 Enter an access password in the
Step 5 Click
text box.
Submit
Changing the IP Address Used for Logging
5.4
In to the Web-Based Configuration Utility
To make the login IP address easy to remember, you can change the IP address after
logging in to the Web-based configuration utility.
To change the IP address, do as follows:
Step 1 Choose
>
>
in the navigation tree to display
Advanced Basic LAN > DHCP
the LAN Host Settings page.
Step 2 Enter a new IP address as desired in the
subnet mask in Subnet Mask text box.
text box. Then, enter a
IP Address
Step 3 Click
to save the settings.
Submit
11
To log in to the Web-based configuration utility after you change the IP
address successfully, you need to launch the Internet Explorer, and then
enter the new IP address in the address bar. Ensure that the IP address of
the computer is in the same network segment as that of the HG523a so
that the computer can access the Web-based configuration utility.
Restoring Default Settings
5.5
After you restore the default settings, your customized data is lost.
Therefore, use this function with caution.
You can quickly restore the default settings of the HG523a by pressing the RESET
button on the rear panel. To restore the default settings, press and hold the RESET
button for over six seconds after the HG523a is powered on, and then release the button.
In addition, you can restore the default settings of the HG523a through the Web-based
configuration utility.
To restore the default settings through the Web-based configuration utility, do as
follows:
Step 1 Log in to the Web-based configuration utility, and then choose
>
Advanced
Maintenance > Device > Reset in the navigation tree to display the reboot
page.
Step 2 Click
.
Restore Default Settings
After the preceding operations, the page jumps to the login page. You can log in to the
Web-based configuration utility by entering the default user name and password that
are admin.
6 FAQs
How can I quickly restore the default settings of the terminal?
To restore the default settings, press and hold the RESET button on the rear panel
for over six seconds after the HG523a is powered on, and then release the button.
What can I do if I cannot access the Internet through the terminal?
Step 1 Check whether the
indicator on the terminal is solid on.
Power
If the Power indicator is off, perform further checks as follows:
1. Ensure that the terminal is turned on.
2. Ensure that electricity comes from the socket and that the power input
from the socket meets the requirements described on the label of the
12
terminal power adapter. If the voltage is unsteady, for example, if the
voltage is too high or too low, do not use the terminal. Wait until the
voltage restores to its normal level, and then use the terminal.
3. Ensure that the terminal is properly connected to the socket through
the power adapter.
If the Power indicator is still off, contact an authorized maintenance
center.
Step 2 After powering on the terminal, wait for about three minutes. Then, check
whether the ADSL indicator on the terminal is solid on.
If the ADSL indicator blinks for a long time, perform further checks as
follows:
1. Ensure that telephone lines are properly connected. Pay special
attention to the connections between the telephone lines and the
splitter.
2. Ensure that the terminal or telephone lines are far from the electric
appliances that generate strong magnetic or electric fields. Replace
telephone lines when necessary.
If the ADSL indicator still blinks and does not turn solid on, contact your
network operator.
Step 3 Check whether the LAN indicator of the terminal is on.
If the LAN indicator is off, perform further checks as follows:
1. Ensure that the network adapter of the computer is enabled.
2. Ensure that the network cable between the terminal and the computer
is properly connected. Remove and then insert the network cable or
replace the network cable when necessary.
If the LAN indicator is still off, contact an authorized maintenance center.
Step 4 Check whether the driver for the network adapter is properly installed.
Take a computer that runs Windows XP as an example. To check whether
the driver for the network adapter is installed, do as follows:
1. On the desktop, right-click My Computer, and then choose Manage.
2. In the navigation tree of the Computer Management window,
choose Device Manager.
3. In the right pane of the Computer Management window, click
Network adapters to view the information about the network adapter
of the computer.
If no network adapter is found or if a question mark (?) or an exclamation
mark (!) is displayed next to the icon of the network adapter, you can infer
that the driver for the network adapter is not properly installed. In this
case, re-install the driver for the network adapter of the computer.
13
Step 5 Ensure that you have entered the correct user name and user password that
are required by the PPP dial-up software.
The user name and the user password are provided by your network
operator.
Step 6 Check whether you can use the PPP dial-up software to dial successfully.
If you cannot use the PPP dial-up software to dial successfully, perform
further checks as follows:
1. Stop the PPP dial-up software and then power off the terminal. After
five minutes, power on the terminal, and then use the PPP dial-up
software to dial again.
2. Restore the default settings of the terminal.
If the problem persists, contact your network operator.
Step 7 Check whether the proxy server of the Web browser is correctly
configured. Take the Internet Explorer installed on a computer that runs
Windows XP as an example. To check whether the proxy server of the
Web browser is correctly configured, do as follows:
1. Launch the Internet Explorer.
2. Choose Tools > Internet Options.
3. In the Internet Options dialog box, click the Connections tab.
4. In the Local Area Network (LAN) settings group box, click LAN
Settings.
5. In the Proxy server group box of the Local Area Network (LAN)
Settings dialog box, ensure that the Use a proxy server for your
LAN (These settings will not apply to dial-up or VPN
connections). Check box is cleared.
Step 8 Try to access multiple Web sites to check whether the terminal can access
these Web sites.
If the terminal still cannot access Web sites, contact your network service
provider.
What can I do if Web pages often cannot be displayed during Web page browsing
and can be displayed after the terminal is restarted?
Step 1 Ensure that the terminal and other devices, such as telephones or fax
machines, are connected to telephone lines through a splitter.
For details about how to install a splitter, see the related description in the
manual.
Step 2 Ensure that telephone lines are properly connected.
If the telephone lines are improperly connected, the stability of the
network connection is affected.
14
Step 3 Check the positions of your terminal and your computer. Ensure that they
are far from electric appliances, such as microwave ovens, refrigerators,
or cordless telephones, that generate strong magnetic or electric fields.
If the problem persists, contact your service provider.
What can I do if sometimes the terminal cannot access the Internet through a WLAN
connection or if the WLAN connection is unsteady?
Step 1 Check the positions of your terminal and your computer. Ensure that they
are far from the electric appliances, such as microwave ovens,
refrigerators, or cordless telephones, that generate strong magnetic or
electric fields.
Step 2 Place your terminal in an open area.
Although radio signals can pass through obstacles, the transmission
effects of WLAN radio signals are affected if radio signals pass through
too many obstacles, such as cement or wooden walls.
Step 3 Place your computer close to your terminal.
If your computer is far from your terminal, the effects of the WLAN are
affected.
Step 4 Place your terminal and computer in another direction.
Step 5 Do not use your terminal to access the WLAN during thunderstorms.
After a broadband terminal is installed, does Internet access degrade call quality or
do telephone calls lower the Internet access rate?
No. The terminal uses the frequency division multiplexing (FDM) and splitter
technologies to separate voice signals from data signals. Although the two types of
signals are transmitted through one telephone line, they are carried by different
frequency bands. Therefore, they do not interfere with each other. In this case, you
can make a telephone call and access the Internet simultaneously, without degrading
call quality or lowering the Internet access rate.
7 Appendix
Indicators
7.1
Indicator
Status
Solid on
Off
Description
Power
The HG523a is powered on.
The HG523a is powered off.
15
Indicator
Status
Description
ADSL
Blinking The HG523a is being activated.
Solid on
Off
The HG523a is activated.
The HG523a is powered off.
Internet
Blinking Data is being transmitted.
Solid on
The HG523a works in routing mode.
No Data is being transmitted.
The WAN connection is set up.
Off
The HG523a works in bridge mode or in routing
mode.
No WAN connection is set up.
WLAN
WPS
Blinking
Solid on
The wireless network function is enabled.
Data is being transmitted through the WLAN.
The wireless network function is enabled.
No data is being transmitted through the WLAN.
Off
The wireless network function is disabled.
Blinking
The HG523a is attempting to set up a wireless
connection with a wireless client through the
WPS function.
This state lasts no more than 120s.
On
A wireless connection is set up between the
HG523a and a wireless client through the WPS
function.
This state lasts 300s.
Off
The WPS function is disabled.
LAN1,LAN2
Blinking Data is being transmitted through the Ethernet
interface.
Solid on
Off
The Ethernet connection is set up.
The Ethernet connection is not set up.
16
Interfaces and Buttons
7.2
Interface or
Button
Description
Power
It is used to connect the power adapter.
LAN1, LAN2
ADSL
It is used to connect to the Ethernet interface on the computer.
It is used to connect to the MODEM interface on the splitter.
ON/OFF
It is the power switch and is used to power on or power off the
HG523a.
RESET
You can press and hold the RESET button for over six seconds
to restore the default settings of the HG523a.
Note: After you restore the default settings, your customized
data is lost. Therefore, use this function with caution.
WLAN
WPS
You can press the WLAN button to enable the WLAN function.
You can press the WLAN button (less than two seconds) to
enable the WPS function.
Default Settings
7.3
Parameter
Setting
IP address of the LAN interface
Subnet mask of the LAN interface
192.168.1.1
255.255.255.0
User name used for logging in to the Web-based admin
configuration utility
Password used for logging in to the Web-based
configuration utility
admin
Wireless network function
Enable
Technical Specifications
7.4
Item
Specification
12 V DC, 0.5 A
≤ 6 W
Entire-device power supply
Entire-device power consumption
Ambient temperature for operation
0°C to 40°C (32°F to 104°F)
17
Item
Specification
Relative humidity for operation
Dimensions (L × W × H)
5% to 95%, non-condensing
134 mm × 100 mm × 31 mm
Weight
< 250 g
Standards
ADSL standards
ITU G.992.1 (G.dmt) Annex A
ITU G.994.1 (G.hs)
ANSI T1.413 Issue 2
ADSL2 standard
ITU G.992.3 (G.dmt.bis) Annex A
ITU G.992.3 (G.dmt.bis) Annex L
ADSL2+ standard
WLAN standard
ITU G.992.5 Annex A
802.11b , 802.11g , 802.11n and Mixed
working mode
DSL
transmission
rates
G.dmt
Maximum downlink rate: 8 Mbit/s
Maximum uplink rate: 896 kbit/s
T1.413
G.992.5
(ADSL2+)
Maximum downlink rate: 24 Mbit/s
Maximum uplink rate: 1024 kbit/s
Wireless
transmission
rates
802.11b
1 Mbit/s, 2 Mbit/s, 5.5 Mbit/s, and 11
Mbit/s
802.11g
6 Mbit/s, 9 Mbit/s,12 Mbit/s, 18 Mbit/s,
24 Mbit/s, 36 Mbit/s, 48 Mbit/s, and 54
Mbit/s
802.11n
6.5 Mbit/s, 13 Mbit/s, 13.5 Mbit/s, 19.5
Mbit/s, 26 Mbit/s, 27 Mbit/s, 39 Mbit/s,
40.5 Mbit/s, 52 Mbit/s, 54 Mbit/s, 58.5
Mbit/s, 65 Mbit/s, 81 Mbit/s, 108 Mbit/s,
121.5 Mbit/s, 135 Mbit/s
18
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
|