Model: iB40
Studio Monitor Style Stereo
Headphones with In-Line
Volume Control
Using Your iHome Headphones
The ear cups are marked “L” and “R”. When worn properly
the headphone cable with in-line volume control will be on
your left side. The two ear cups may be adjusted up or down
for most comfortable fit.
Connect the headphone plug to the headphone jack of your
music player. Be sure that the plug is fully inserted into the
jack. If the plug is not fully inserted you may only hear sound
from one side of the headphones.
If you are using this headphone with an older stereo receiver that has a larger size
headphone jack, attach the supplied 6.3mm headphone plug adapter to the 3.5mm
headphone plug.
To protect your hearing, always start listening with the In-Line Volume Control set to a
low level and gradually increase the volume to a comfortable listening level.
Note: You may have to adjust the volume control on your music player as well as the
In-Line Volume Control on your headphones to find the most satisfactory sound level. If
one control is set too low and the other is set too high, the sound may be distorted. Try
setting the volume control on your music player halfway between the Min and Max
settings, and then use the In-Line Volume Control on your iHome headphones to make
final adjustments.
IMPORTANT! Listening at high volume for long periods of time can result in long-term
hearing damage. For your safety, do not use headphones if they would prevent you from
hearing warning sounds, such as while driving a car or motorcycle, riding a bike, etc.
Remember that studio monitor style headphones such as the iB40 may block outside
noise, including warning sounds. Always be aware of your surroundings and do not use
these headphones in situations that require you to hear warning sounds.
|